24-hour sales and car purchase consultation hotline: 15335795555( 秦部长 Minister Qin)     中文
Hello!Welcome to visit Chengli special purpose vehicle Co., Ltd. sales 24 branch.

CLW5080JGKE5Configuration introduction of Dongfeng Dorica aerial work vehicle

Time:2020-12-22       return Company news list

one、Basic parameters of complete vehicle:  


Serial number

name

Model and specification

1

Vehicle brand

CLW-Dongfeng Duolika single row seat 18m aerial work vehicle

2

Product model

CLW5080JGKE5

3

Chassis Model

EQ1080SJ8BDC

4

Maximum working height

18M

5

Main technical parameters of operation

Platform height above ground16.3m

Maximum operating range of platform≥7.9m

Operating range at maximum operating height of platform≥3.1m

Operating height at maximum operating range of platform≥10.2m

Rated load of platform200kg

Outrigger

Method: H-type Outrigger

Quantity: 4 pieces

Control: individually adjustable or linked.

Transverse span:3755mm

Vertical cross drama:3750mm

a hook

Maximum lifting weight≤1000kg,Safety value800kg。

Maximum lifting height7.7m

Main operation

Operation position: double working positions of turntable and lifting rail.
Control mode: manual hydraulic or electric control operation.

6

Coaming and Walking board

Steel toolbox and coaming, pattern anti-skid walking board

7

Boom structure

Three section folding arm

8

Rotary device

Bidirectional3600continuous rotation

9

engine

Determined according to environmental protection announcement

10

vehicle size

8350×2200×3300

11

Total mass

7640

12

curb weight

7445

13

wheelbase

3800mm

14

Environmental protection / exemption

Yes / Yes


two、Introduction and performance characteristics of aerial work vehicle:

1、Function introduction:

Dongfeng dadolika 18m aerial work vehicle adopts folding curved arm structure. The working arm is three sections of folding type. The platform and turntable are in duplex position, operated up and down, hydraulically and manually controlled, capable of 360 degree rotation, four hydraulic legs, with 1t hook. The maximum load of the platform is 200kg, steel toolbox, coaming and pattern anti-skid walking board.

The vehicle is equipped with two-way hydraulic lock, two-way lock balance valve, fluid flow valve, hydraulic cylinder and other main components, which are made of domestic well-known brands, with stable reversing and flexible and convenient operation; The outrigger is interlocked with the working arm, which is safe and reliable to prevent misoperation; The H-shaped outrigger has large span and good stability. The outrigger can be expanded and linked independently. The rear outrigger is equipped with outrigger flash lamp, which is used to show the outline of the outrigger and send out light alarm signals during operation.

2、Product overview:

The working platform adopts mechanical self balancing design, which is used to keep the working platform in balance all the time.

The maximum extension angle of the jib is 65 °, so as to adjust to the best working position. (jib extension angle is measured in different ways, and some manufacturers mark it as 90 °)

The upper and lower operating systems can complete various operation actions on the platform and turntable.

Night work light, the operation light can be selected on the console according to the customer's working environment, so as to make night work safer.

The outriggers can be adjusted separately. Each outrigger can be adjusted separately according to the working ground environment. Even if the ground is uneven, the whole vehicle can be adjusted to a stable state.

The outrigger adopts front and rear H-shaped structure, with larger stress surface and higher stability; It can prevent the girder from deformation or fracture (Note: if the outrigger adopts the front V and rear h models, it is easy to cause the girder deformation or fracture due to the upside down of the front of the vehicle after long-term use).

The four vertical outrigger cylinders and the upper arm, lower arm and jib cylinders are equipped with two-way hydraulic locks, which is used to lock the cylinder after it reaches the required position to prevent accidents. A two-way balance valve is installed on the working arm to make the operation of the working arm more stable.

three、Details of on-board accessories:

1. A manual of truck. 2. One copy of automobile chassis certificate. 3. A manual of aerial work vehicle. 4. Truck warranty. 5. Truck tools.




Recommended products

  • Reference price 15335795555
  • Reference price 15335795555
  • Reference price 15335795555
  • Reference price 15335795555
  • Reference price 15335795555
  • Reference price 15335795555
  • Reference price 15335795555
  • Reference price 15335795555
  • Reference price 15335795555
  • Reference price 15335795555
15335795555 (Wechat)