Precautions for operation and use of emergency rescue fire engines
Lighting device
① Before driving, check whether the lifting lamp is fully retracted and locked.
② Before using the generator, the rescue fire truck must be well grounded.
③ Before using the lifting lamp, the vehicle must be parked at a position where there are no obstacles above and the ground is relatively flat, and keep it horizontal as far as possible to ensure the normal extension of the lifting rod.
④ The surface temperature of the lamp after use is high. It is strictly prohibited to touch it to prevent scalding.
⑤ When using the lamp, it is strictly prohibited to look directly at or touch the lamp.
⑥ Non electrical professionals are not allowed to dismantle, repair or change the line at will to avoid accidents.
⑦ The lifting lighting device should be kept away from dangerous devices such as high-voltage lines. It is strictly prohibited to use it in thunderstorm weather.

Precautions for operation and use of emergency rescue fire engines
capstan
① During winch operation, the whole vehicle shall be in braking state, and brake pads shall be placed under the wheels for fixation.
② The hydraulically driven winch drags the power take-off device according to the operation instructions, and the hydraulically driven winch is adjusted to the required speed
Homework.
③ When the steel wire rope is retracted, use anti cutting gloves to drag the steel wire rope to prevent scratching.
④ It is strictly prohibited to pull beyond the limit and working range.
⑤ During the traction operation, the traction shall be kept at a constant speed as far as possible. No one is allowed on both sides of the steel wire rope to prevent breaking and wounding.

⑥ During the maximum distance traction operation, the protruding length on the reel shall not exceed the length of the painted warning coil to prevent the wire rope from being disconnected.
⑦ It is forbidden to use winch wire rope to directly bind heavy objects for traction.
⑧ After use, the winch without wire arrangement device shall adopt manual auxiliary wire arrangement to prevent wire disorder.
⑨ The traction direction of the steel wire rope shall be horizontal as far as possible, and the included angle between the steel wire rope and the center line of the fire truck shall not exceed 10 (see the operation manual for details). If the angle is too large, the axial force on the guide moving rod of the rope will be too large, resulting in the deformation of the guide teeth of the moving rod and hairpin during operation.
⑩ Other operating instructions for the winch shall be carried out in strict accordance with the operating methods and sequences specified in the operating instructions.
Precautions for operation and use of emergency rescue fire engines

Truck mounted crane

① Operators must receive training and carry out practical operations for many times, and can only operate after mastering the correct operation methods. In particular, they should fully understand the torque table of the truck mounted crane. ② During operation, the whole vehicle is in neutral, the brake is in braking, and the wheels are fixed with brake pads.
③ Before operation, the outrigger must be fully extended to keep the vehicle body stable during lifting operation.
④ Try to keep the movement gentle during operation, especially when lifting heavy objects, pay attention to controlling the angle and amplitude of rotation to prevent collision with the vehicle body; It is forbidden to drag heavy objects with the boom.
⑤ During operation, the load shall not exceed the rated lifting weight. The load of the truck mounted crane is the sum of the weight of the hook, spreader and other accessories and the weight of the lifted object.
⑥ During the turning operation, pay attention to the surrounding obstacles to make the heavy objects turn when they are low off the ground.
⑦ After the operation is completed, the boom and outrigger must be reset, and then insert the fixing pin to disconnect the power take-off.
⑧ When hoisting with winch wire rope, pay attention to the height limiter to ensure that the hoisting height does not exceed the safe working range.
⑨ Other operations on the truck mounted crane shall be carried out in strict accordance with the provisions of the operation manual.