Front four rear eight 30 ton hook arm garbage truck of SINOTRUK

Introduction to the 30 ton shandeka hook arm garbage truck of the first four rear eight heavy duty truck:

(National VI) hook arm garbage truck, pull arm garbage truck the pull arm garbage truck is our own brand 30t telescopic boom (the maximum hook capacity is 35t)

1：Domestic well-known brand Luzhou Zhongda / Hubei Boli hydraulic double cylinder (cylinder diameter 190mm)

2：Yangzhou Zhongmei / Hefei Changyuan quadruple electric or quintuple control multi-channel valve

3：High pressure piston pump imported from Italy

4：Standard roller rear Outrigger

Introduction to chassis parameters of 30t heavy truck shandeka front four rear eight hook arm garbage truck:

Wheelbase 1800+3800+1350, mc07.31-60 engine (German Mann 310 HP); Hw15710 gearbox +hw50 flange power take-off; H653 self-adjusting arm front axle (6T drum type); Mcj11 punching welding self-adjusting arm double rear axle (man 11T drum type); Double layer frame (8+4/280); With ABS, 295/80r22.5; Speed ratio 4.875; 300L fuel tank and front lower protection of the whole vehicle are optional; Sinotru smart version a is optional.

Introduction to the multi-functional garbage cans equipped with the front four rear eight of the 30 ton heavy truck shandeka:

It can be equipped with 25-35 cubic meters of multi-functional garbage cans, and the length of the box: 6800-7000mm; Width: 2300-2500mm; Height: 1700-1800mm; (hydraulic wingspan upper cover, hydraulic locking sealing rear door or butt joint rear door are available)

Features of hook arm garbage truck:

 1 、Strong mobility, one vehicle is responsible for the transportation of multiple garbage cans at the same time, which is efficient and reduces the transportation cost;

 2、 The garbage bin covers a small area, which saves civil engineering resources and does not need to be equipped with additional lifting devices;

 3、 Ultra high strength wear-resistant steel, yield strength 490mpa;

 4、 The self weight of the equipment is light, the lifting capacity is large, and the maximum dump angle is 50 degrees;

 5、 The equipment is firm and durable with long service life;

 6 、The safety system includes: loading and holding valve, hydraulic and mechanical box locking device, tilt locking device, and good tilt lock stability;

 7、 Equipped with hydraulic oil filter indicator;

 8 、The operation speed is fast, and the round-trip time of one loading and unloading is 80-120 seconds;

 9 、The advanced heavy container loading and unloading support mechanism is equally excellent in both hard and soft ground operations. Before loading the garbage, the hook arm garbage truck can only hang the power take-off (at the bottom left of the steering wheel in the cab) when the no-load operation reaches 6 standard air pressures. After checking whether there is any leakage or abnormality in each component, operate according to the position indicated by the operation indicator.