VI 25 m3 heavy truck front four rear eight water tank fire truck

1、Chassis parameters

2、Modification part

1) Cab

Structure: flat head, double row seat, four door passenger compartment, all steel frame welded structure.

Seating arrangement: there are 3 people in the front row and 3 people in the back row. The backrest of the rear seat is equipped with 3 backrest brackets and fixing fixtures for air respirators, and is equipped with shock protection devices.

Guardrail and handrail shall be installed in front of the seat. Firefighters quickly carry air respirators on the way to fire fighting and rescue, and quickly put into fire fighting and rescue operations after arriving at the fire site.

Cab structure: a hydraulic turnover mechanism suitable for tipping is installed, and an anti falling safety device is installed.

Equipment in the cab: in addition to the original vehicle equipment, power takeoff control switch, 100W alarm, alarm light switch, etc. shall be added.

Outside the cab: a long row of alarm lights are installed at the front of the cab top.

2) Tank volume

Capacity: water: 24600kg

Material: water tank: high quality steel plate, high-tech anti-corrosion treatment

Structure: the frame is welded, and longitudinal and transverse anti sway plates are set in the tank to reduce the impact of water in the tank on the tank during vehicle driving

The front and rear wall plates of the tank body are folded with trapezoidal ribs, so that the tank body has sufficient strength and stiffness.

3) Fire pump

Fire pump: CB10 / 100 atmospheric pressure fire pump

Flow: 100L / S

Pressure: 1.0MPa

Installation type: rear

Vacuum pump: piston type;

Material of vacuum pump: wear resistant and corrosion resistant, meeting the sealing requirements;

Diversion time ≤ 35S, suction depth ≥ 7m.

Maximum vacuum: ≥ 85kpa;

3、Fire monitor

Model: ps80d fire monitor

Flow: 80 (1 / s)

Range: water ≥ 65m

Pressure: 1.0MPa

4、  Power takeoff

Type: full power sandwich power take-off

Cooling mode: forced water cooling

Lubrication method: splash oil lubrication

5、  Equipment box and pump room

Main materials:

The framework and skin are made of high-quality carbon steel; The internal equipment rack adopts aluminum alloy profile, and the interior trim panel is oxidized aluminum plate.

6、Basic principle:

（1） Combat equipment design and integration;

（2） Design all kinds of equipment brackets according to the principle of ergonomics;

（3） The principle of using any equipment in the box without any climbing tools is concise and practical.

（4） Place the equipment according to the logical relationship and frequency of use;

（5） Stand on the ground or pedal and take any equipment within 1-2 actions.

7、Electrical system

(1) . the top of the cab is equipped with a long row of red luxury alarm lights.

(2) . the power of the alarm is 100W;

(3) . the roof is equipped with a fire light; Safety sign lamps are set under both sides of the vehicle, and reflective signs are pasted on the body and tail according to the standard.

(4) All equipment boxes are equipped with LED lights to facilitate night combat lighting.

(5) . two flash lamps are equipped at the top of both sides of the vehicle, safety identification lamps and side reflex reflectors (combined type) are installed at the bottom, front and rear clearance lamps are equipped, one turn signal lamp is equipped at both sides, and there are lights in the passenger compartment, equipment box and pump room.

(6) The, alarm, alarm lamp, strobe lamp and circuit are independent additional circuits, and the controller is installed in the cab.

(7) All lines are protected by sleeves, and different colors are used to distinguish the connection form and function of lines.

(8) Equipment on the instrument panel in the pump room: liquid level gauge, tachometer, pressure gauge, vacuum gauge, equipment box, lighting switch, etc.

8、Instrument panel and on-board equipment

(1) The instrument panel is located in the pump room at the rear of the vehicle, with a control panel and sufficient lighting;

(2) All control handles, switches and indicator lights are marked in Chinese;

(3) . there are instructions for operation steps.