The following safety inspections must be carried out before the fire truck leaves the factory:
① The rear vision of the fire truck shall comply with the provisions of gb15084-2013 performance and installation requirements for indirect vision devices of motor vehicles; The installation requirements of external lighting and signal devices shall comply with the provisions of GB4785-2007 regulations on the installation of external lighting and light signal devices of automobiles and trailers.
② The external surface of the fire truck shall comply with the provisions of GB20182-2006 external protrusions of the cab of commercial vehicles, and there shall be no sharp protrusions and sharp edges. There shall be no articles and heat sources that may cause injury to operators around the operation area of fire-fighting devices.
③ Protective devices shall be provided for hot surfaces exceeding 60 ℃ and high-speed rotating objects that may be touched by personnel.
④ The hose interface with nominal diameter greater than 65mm and the pipeline with pressure not less than 18Mpa on the fire truck shall be far away from the operator, or protective measures shall be taken.
⑤ Protective devices shall be set at the exposed place of the exhaust system to prevent possible injury to operators.
⑥ Every passenger except the driver shall have a handrail to fix his body, and the handrail size shall ensure that he can still grasp it with protective gloves. The driver's cab shall have handrails that are convenient for getting on and off, and the handrails shall ensure that they can still be grasped with protective gloves.

⑦ There shall be no sharp corners, sharp edges, projections and other shapes that may cause injury to personnel on the outdoor surface and interior of passengers. ⑧ The length and depth of pedals for passengers to get on and off shall not be less than 200mm and 100mm respectively. The pedal shall be provided with lighting and anti-skid measures, and the distance from the nearest level to the ground shall not be greater than 500mm.
⑨ The height of the pedal of the taking and placing equipment from the ground shall not be greater than 450mm, the length shall not be less than 300mm, and the depth shall not be less than 200mm. There shall be yellow warning lights flashing in front and rear of the fire truck after it is put down.
⑩ The pedal shall be capable of carrying a weight of 75 kg / 500 mm.
⑪ When the pedal is overturned, there shall be a locking mechanism at the driving position to prevent the pedal from overturning automatically after being vibrated.
2 the handrail and vehicle body shall be fixed reliably, and shall be able to bear 100 kg tensile force without falling off and fracture; The height of the handrail from the floor of the driving room shall be convenient for passengers to grasp when sitting on the seat; The handrail shall be made of non-metallic materials preferentially. If metal materials are used, a non-metallic layer shall be coated on the outside of the handrail with anti-skid patterns.
⑬ When people need to operate or repair equipment on the top of the driving room, it shall be ensured that it can bear a static load with a mass of 100kg within 300mmx200mm, and anti-skid measures shall be taken on the top of the driving room; The cab shall have the same strength and stiffness as the original cab. The shape, material and thickness of the floor, top cover and stiffener shall be the same as that of the original cab.